Author Topic: air quality sensor  (Read 3355 times)

0 Members and 1 Guest are viewing this topic.

robbert

air quality sensor
« on: August 23, 2011, 03:32:32 PM »
I have an air quality sensor but don't know how to wire it.
Can somebody help me.??
I got also the technical data in the jpeg.
Thanks,

Robbert

barragan

Re: air quality sensor
« Reply #1 on: August 24, 2011, 01:52:15 AM »
hi Robbert, from the diagram seems 1 goes to 3.3v, 2 goes to 3.3v, 3 goes to the analog input pin and 4 goes to ground. RL is a pull down resistor (a resistor going from the pin 3 to ground, try it without the resistor and see what values you get. You could use the photoresistor example code to try: http://wiring.org.co/learning/basics/photoresistor.html

Let me know.


robbert

Re: air quality sensor
« Reply #2 on: August 31, 2011, 04:48:38 PM »
Sorry for the late response.  i'll try it now and i let you know.
Thanks,
Robbert

robbert

Re: air quality sensor
« Reply #3 on: August 31, 2011, 06:51:41 PM »
the only thing i get out of it are numbers that are not very differet even with smoke in the sensor.  like 654  655  678 etc.
 :-\

barragan

Re: air quality sensor
« Reply #4 on: September 02, 2011, 09:59:00 AM »
could you try different values for RL? 1K or 10K

robbert

Re: air quality sensor
« Reply #5 on: October 22, 2011, 01:06:56 PM »
i am busy buying the resistors,

Thanks