All Forums > Wiring Hardware Questions

Using Wiring IDE, Duemilanove to upload sketches to a 1284P

<< < (3/3)

Bam_Sam:
Using a mac:
Using Arduino "Uno"

I have the same error message:

***failed; 
avrdude: verification error, first mismatch at byte 0x0000
         0x05 != 0xfd
avrdude: verification error; content mismatch

so I have changed:

atm1284p16MHz.bootloader.extended_fuses=0X05
to
atm1284p16MHz.bootloader.extended_fuses=0xFD

in Hardware/Atmel/boards.txt.

I restarted Wiring, re-uploaded WiringISP onto Arduino Uno, then again Burn Bootloader, but with the same exact Error:

Am I changing the wrong boards.txt?

Please help... Thanks

Bam_Sam:
OK, decided to re-install Wiring with edited boards.txt and it did the trick.

Bhagman thank you! This has helped me big time!!!!

MStark:

--- Quote from: Bam_Sam on March 13, 2012, 06:52:17 PM ---OK, decided to re-install Wiring with edited boards.txt and it did the trick.

Bhagman thank you! This phenq at https://skinnyexpress.com/phenq-review has helped me big time!!!!

--- End quote ---

Where is the edited boards.txt?

Qynx:
In hardware/Atmel, edit the boards.txt file,

Navigation

[0] Message Index

[*] Previous page

Go to full version