Author Topic: Wiring S Board schematics mismatch  (Read 2843 times)

0 Members and 1 Guest are viewing this topic.

ffox11

Wiring S Board schematics mismatch
« on: November 24, 2011, 05:19:32 AM »
Hi Barragán

After downloading and opening the Eagle files for the Wiring S board I realized they don't match that board. They show the Wiring Rev 0004, which uses a mega128-a MCU.

Could you upload the Wiring S (Rogue Robotics) board eagle files for the atmega644p ?

Thanks!

worapoht

Re: Wiring S Board schematics mismatch
« Reply #1 on: November 25, 2011, 02:41:14 AM »
Wiring S schematic was provide in Kicad format (not Eagle)
on download page,
http://www.wiring.org.co/download/index.html

I'd download and open them without problem.. ;)

ffox11

Re: Wiring S Board schematics mismatch
« Reply #2 on: November 25, 2011, 08:11:15 AM »
Hi Worapoth

Early this morning I realized that after downloading the schematics and opening them with Kicad I had to leave. After returning, I looked for the file in the wrong folder with the result that I thought there was a mismatch.

This morning I repeated the whole procedure and voila the right schematic is there.

I apologize for the misleading posting.

Regards