Microphone circuit: error in fritzing

[zamfi]

Hi!

A student of mine tried to make the circuit from the wire image here: http://wiring.org.co/learning/basics/microphone.html

But in the wire image and the schematic don't match up exactly -- in the wire image, the unbanded end of the diode mistakenly goes to pin 6 on the LM386, not pin 5 (as in the schematic).

Hope this helps someone out.

Best,
J.D.

[barragan]

Thank you, we'll do a revision.

[wazupbongo]

A revision still hasn't been posted