Wiring Forum

All Forums => Project Questions / Guidelines => Topic started by: jerrodlobdell on May 18, 2014, 10:31:53 PM

Title: Trouble with trailer wiring...NEED HELP!!!
Post by: jerrodlobdell on May 18, 2014, 10:31:53 PM
Hey guys,
Im rewiring my boat trailer and thought I did everything correctly. Its a 4 pole flat connector with the white, yellow, green, and brown wires. I connected everything together according to color coordination with butt connectors and grounded everything. When I turn the lights on my truck on the tail lights come on just fine. The problem is when I push the brake in, the trailer lights shut off completely. Releasing the brake allows them to come back on. Also, whether I use the right turn signal or the left one...both trailer lights flash as if my hazards are on. Anybody have any ideas for me??? Im stumped...kind of a rookie electrician...

Thanks!!
Jerrod
Title: Re: Trouble with trailer wiring...NEED HELP!!!
Post by: barragan on May 24, 2014, 12:54:43 PM
hi, this forum is about the http://wiring.org.co project but let's see if someone could help.
Title: Re: Trouble with trailer wiring...NEED HELP!!!
Post by: Soupy on February 10, 2017, 01:20:00 AM
hi, this forum is about the vigrx plus project (https://elasticss.com/vigrx-plus-review-and-results) but let's see if someone could help.

Hi Jerrod did you solve this?